Installing LED auxiliary lights on your motorcycle is a great way to enhance your visibility and improve your ability to see in low light conditions. This is particularly important if you frequently ride at night or in inclement weather. In this article, we will go over the step-by-step process of installing LED auxiliary lights on your motorcycle. SercoMoto design and produce Lights for motorcycle
www.sercomoto.com/lights
Step 1: Choose Your Lights
The first step is to choose the right set of LED auxiliary lights for your motorcycle. There are a wide variety of options available on the market, so you'll want to consider your specific needs and preferences. Consider factors like brightness, color temperature, and beam pattern. You'll also want to consider the size and shape of the lights to ensure that they will fit properly on your bike.
Step 2: Plan Your Installation
Before you start the installation process, it's important to plan out the placement of the lights on your motorcycle. You'll want to choose a location that provides optimal visibility and doesn't obstruct any of your other lights or controls. Some popular locations for LED auxiliary lights include the crash bars, the handlebars, and the forks.
Step 3: Gather Your Tools
To install your LED auxiliary lights, you'll need a few basic tools, including a socket set, pliers, wire strippers, electrical tape, and a fuse holder. You may also need a drill and a set of drill bits if you plan on mounting your lights to your bike.
Step 4: Install the Lights
The installation process will vary depending on the specific lights you have chosen and the location where you plan to install them. However, the general steps are as follows:
Mount the lights: Use the appropriate hardware to mount the lights to your chosen location on the bike. Be sure to test the lights to ensure that they are positioned properly and don't interfere with any other components.
Connect the wiring: Use your wire strippers to remove a small section of insulation from the positive and negative wires on the lights. Then, connect these wires to the corresponding wires on the wiring harness that came with the lights. Be sure to use electrical tape to secure the connections.
Route the wiring: Route the wiring harness from the lights to the battery or other power source. Be sure to use zip ties or other fasteners to secure the wiring in place and prevent it from rubbing against other components.
Install the fuse holder: Install the fuse holder on the positive wire of the wiring harness, as close to the battery as possible. This will help protect your motorcycle's electrical system from any potential damage caused by a short circuit.
Step 5: Test the Lights
Once you have completed the installation, test the lights to ensure that they are working properly. Turn on your motorcycle and activate the lights to make sure they are properly wired and installed.
In conclusion, installing LED auxiliary lights on your motorcycle is a relatively simple process that can greatly enhance your visibility and safety while riding. By following these steps, you can easily install your own lights and enjoy a safer and more enjoyable riding experience.