SercoMoto SM6121SD

Every SercoMoto Lights kit is an all-in-one lighting solution that includes a pair of lights, switch, wiring harness, mounting brackets, and all necessary hardware.

Our products are guaranteed for a year, but if you experience a problem at any time with your SercoMoto Lights, even after years of ownership, contact us let us know what’s going on, and we will be happy to work out a solution that keeps you satisfied.

Key features of SM6121SD

Aluminum housings .

Designed for extreme lighting needs on virtually any vehicle.

With dimmerable harness

Utilize Cree LED lights / Luminus and LED components.

Stable performance

Waterproof

Each led with lens ( different part with SM6121)

Specifications:

60 watts consumption each (Max ).

3.55" （90mm）diameter.

6000+ lumen each.

Wiring harness included. (dimmerable harness SM002d)

Adjustable bracket

Power support 12V ~ 15V

What's in box:

Two Lights

Two Clamp (20~25MM model: SM059)

One Wiring harness

One Switch

Two Yellow covers (option transparent）

( option extra bracket Model: SM1250 for BMW 1200 1250 can buy)

Dimmerable Lights Functions:

1. Click the switch to turn on lights

2. Press and hold the switch for 3 seconds to start the strobe mode( 3 kinds strobe modes)

3. Click the switch to cancel the strobe mode (return to normal light)

4. it support multiple level bright via dimmer from 5 to 100% bright

5. With the brightness memory function, the last time the brightness was set to 10%, next time when turn on, it will keep the brightness of 10%, same as last setting.

6. Pass light on, the lights will be full power beam.

7. Press horn, the lights will be strobe.

8. sync high beam with bike's ligh high bam

Harness install

Bigger 2 wires

Red wire with fuse connect with battery positive part

Black wire connect to battery negative part

Small 3 wires

Black is horn strobe wire, connect to horn wire.

Red wire connect it to ACC wire or bike switch positive wire or the wire only keys on can have power.

Green wire is high beam wire connect to bike pass light positive wire or bike high beam wire

(Note: for green wire we have 2 connect suggestions. this wire provide a full power beam signal to light, when this wire get power sercomoto lights will be turn on with full power beam or from low beam to full power beam. you can connect to your bike pass light wire positive wire. or can connect to bike high beam positive wire, once bike high bean on even the lights did not on, it will be auto sync on with bikes high beam)

( red wire and Green wires are optional connect wire, if you dont need can leave it no connect, not must request)

Harness option:

Can choose different harness you need  

(SM007harness). High beam only.

(SM003 harness) Hi beam/Alternating Flash/Sync Flash

(SM002 harness) Low Beam/Middle Beam/ High Beam /Alternating Flash/Slow Flash/Sync Flash/

(SM002A harness) Low Beam/ High Beam /Alternating Flash/Slow Flash/Sync Flash/

(SM002HH harness)Low Beam/ High Beam /Alternating Flash/Slow Flash/Sync Flash/horn Flash